Copyright © 2001 Cathy Long
12" in diameter
One beautifully chrome plated reproduction of a classic all time favorite Hellings. The bottom of the bell measures 12" in diameter.The bell is 3-1/4" high. The whole assembly from the tip top of the nut to the bottom of the flange is 4". Fits Holley, Rochester & Carter carbs with 5-1/8" opening. This will work with single 4V carburetor.
One beautifully chrome plated reproduction of a classic all time favorite Hellings. The bottom of the bell measures 12" in diameter.The bell is 3-
7-1/2"" in diameter
One beautifully chrome plated reproduction of a classic all time favorite Hellings. The bottom of the bell measures 7-1/2". The bell is 3-1/4" high.The whole assembly from the tip top of the nut to the bottom of the flange is 4-3/4". Fits Holley, Rochester & Carter 4V carbs with 5-1/8" opening. This will work with single or dual quad systems. On some dual quad systems the carbs mount a little closer and the air filters will touch you might need to tweek the flanges so they won't touch.
4¾" in diameter
One beautifully chrome plated reproduction of a classic all time favorite Hellings.The bottom of the bell measures 4¾" which is ¼" more than the originals. The bell is 2 5/8" high. The whole assembly from the tip top of the nut to the bottom of the flange is 4¼". Fits Stromberg, Holley, Chandler groove, & early Rochester carbs with 2¾" opening and most Ford 94 model carburetors.
New Batwing Styled Air Cleaner Assembly
Quality made in the good old USA
1951 - 1956 Oldsmobile Cadillac
This brand new all steel bat wing air cleaner is based on the style of the 1951-56 Oldsmobile and Cadillac air cleaners. Will fit most carburetors and throttle bodies with 5-1/8" openings.This air filter assembly is not designed to be an exact replacement for an original GM, Cadillac or Olds part. This will require an adapter if you are using an original 50's Rochester or Carter carburetor that is not 5-1/8". We have adapters for carburetor necks with a diameter of 2-5/8 ", 3" or 4-7/32" . Measuring a whopping 18-1/4" wide, this air cleaner is no wimpy, scaled-down version of this classic design. This new air cleaner has the same external dimensions as the original Oldsmobile oil-bath part. However, this version uses an off-the-shelf 14 inch diameter by 4 inch tall paper filter element. No fiberglass construction here, steel is real.This air cleaner is top stamped from heavy gauge steel, fully spot welded together and then powder coated in a tough semi-gloss finish. The electroplated air cleaner base is also stamped steel and is designed to fit most carburetors and throttle bodies. <BR>The air cleaner is notched at the rear to provide clearance for the large diameter, GM, HEI distributors. This comes with a unique wing nut to complement the air cleaner. This chrome plated, rocket shaped nut was modeled after 50s era space vehicles and measures nearly 1- 1/8 inches tall. This is a ready-to-install kit.
For about half the cost of an original, dented and rusted "swap meet find," hot rodders can enjoy the good looks of the Cadillac air cleaner. Avoid the hassle of restoration and the difficult conversion from oil bath to paper filter element with this Retro Styled Air Cleaner
Assembly. 1951-1956 Oldsmobile / Cadillac style air cleaner designed to fit most carburetors and throttle bodies with 5-1/8" openings, semi-gloss powder coat finish. Includes stamped steel air cleaner top, stamped steel air cleaner base, 4 inch x 14 inch paper air filter, "Rocket" wing nut, carburetor stud, and AC decal.
Don't let the low price fool you.
This is a very high quality part.
Air Filters