Mirrors
1935-1947 Ford pickup truck
hinge pin outside mirrors.Nice pair of reproduction. Bright chrome die cast arm. Polished stainless steel head & pins. Fits 1935-1947 Ford pickup trucks. One left and one right. The mirror diameter is 4″. The pin measures about 2-3/4″ in length and is about 1/4″ in diameter. The head of the pin is about 1/2″ diameter. The space between the brackets, where the pin goes, is about 2″. The arm measures about 8-1/2″.
1935-1940 Ford cars
and 1948-1952 Ford pickup trucks. Ford hinge pin outside mirrors. Nice pair of reproduction. Bright chrome die cast arm. Polished stainless steel head & pins. One left and one right. The mirror diameter is 4″. The length of the arm from the center of the mirror to the top of the first hinge pin on the curve is 10-1/2″ and 13″ to the bottom hinge pin. The length of the arm from the center of the mirror to the top of the hinge pin straight down is 7″. The pin measures about 2-3/4″ in length and is about 1/4″ in diameter. The head of the pin is about 1/2″ diameter. The space between the brackets, where the pin goes, is about 2¼”. The length of the arm is about 9″ long.
One original style
1932 Ford rear view outside windshield post mirror.All polished stainless steel with a smooth back and an anti glare mirror head which is about 4″ in diameter. The arm measures about 5-1/2″ tip to tip. The arm itself (without measuring the threads on either end) measures about 4-1/4″. This will also fit the 1933 & 1934 Ford Open Roadsters & Phaetons.
Outside Rear View Mirror
One outside universal clamp on mirror.The highly polished stainless steel head has a full 4″ anti glare mirror.
The arm is die cast triple chrome plated.
Comes with attaching hardware.
The mirror head rotates a full 360 degrees which allows it to be extended another 2-1/2″.
The arm is not straight it has a nice curve.
The arm measures about 6″ tip to tip.
The arm is die cast triple chrome plated.
Comes with attaching hardware.
The mirror head rotates a full 360 degrees which allows it to be extended another 2-1/2″.
The arm is not straight it has a nice curve.
The arm measures about 6″ tip to tip.
1928-1931 Ford Model A Hinge pin mirrors for left and right.
Brand new pair of reproduction. These have a 4″ mirror head. This will fit Ford Model A from 1928-1931 passenger cars and pickup trucks. Will not fit 1931 Model A with Murray bodied slant windshield post cars. These are beautifully chrome plated with stainless steel head. From the center of the pin to the center of the mirror mount is 5-3/8″. The pin diameter is about ¼” and it’s 2 7/16″ long without the nut on it. Inside of the tabs is about 1-13/16″. Outside of the tabs is about 2-1/8″.
1928 1929 Ford Outside Post Mirror
One original style rear view outside windshield post mirror.
All polished stainless steel with a smooth back and a anti glare mirror head which is about 4″ in diameter. This will also fit Roadsters & Phaetons. One new reproduction. The arm measures about 5-1/2″ tip to tip. The arm itself (without measuring the threads on either end) measures about 4-1/8″.
1930 1931 Ford Outside Post Mirror
One original style rear view outside windshield post mirror.
All polished stainless steel with a smooth back and a anti glare mirror head which is about 4″ in diameter. This will also fit Roadsters & Phaetons. One new reproduction. The arm measures about 5-1/2″ tip to tip. The arm itself (without measuring the threads on either end) measures about 4-1/8″.
1955 1956 1957 Chevrolet mirrors.
One pair of polished stainless head measures 4-1/2″. Bright chrome die cast arm. The base of this measures about 6 3/8″ end to end and the width of the base is about 1 1/8 at the widest point. This is a nice reproduction of the factory GM mirror. Although this mirror is for the 55 56 57 it will compliment many cars of the era. These come with the gasket and mounting screws only.
Pair Flamed Oval outside mirror.
Screw on adjustable outside rear view mirrors with flames. Beautifully chrome plated. Brand new universal fit. This mirror head measures 5-1/8″ at it’s widest point by 2-5/8″ and is 3/8″ thick. The mounting arm measures about 5-1/4″ long. The mounting surface is 3/8″ by 1/2″. The flames are recessed into the mirror housing. The flames are all hand painted and no two paint jobs are alike.
One Flamed oval inside rear view mirror.
Glue on type chrome adjustable mounting. The mirror head measures 5″ at it’s widest point by 2-1/2″ and is 5/16″ thick. Mounting surface is 1″ from back of mirror. Mounting surface is 1″ in diameter. The flames are recessed into the mirror housing. The flames are all hand painted and no two paint jobs are alike. Glue not included.
One screw on adjustable mounting inside rear view mirror with flames.
Beautifully chrome plated. This mirror head measures 5″ at it’s widest point by 2½” and is 3/8″ thick. The long arm measures 2¼” long, the ball measures 1″ from the back of the mirror. The mounting plate is & 5/16″ wide by 2″ long. The holes are spaced 1½” apart, center to center. The flames are recessed into the mirror housing. The flames are all hand painted and no two paint jobs are alike.
3” Peep Mirror or 4” Peep Mirror
One Pair of outside rearview mirrors. Clamp on mount universal fit. 3″ or 4” stainless head. Chrome die cast curved arm. Fully adjustable.
The mirror has a gray tint for nighttime reflection. Can be used on either side.
Woody surf board mirror
Inside rear view mirror. Attractive plastic wood grain finish.
Has adjustable chrome glue on mount. This mirror head measures 12½” at it’s widest point by 2½” and is 1/2″ thick.
Mounting surface is 1″ from back of mirror.
Mounting surface is 1″ in diameter.
Swan neck style outside mirrors.
One pair left & right.
They are triple chrome plated. Mirror head is 4″ in diameter. These have rubber mounting pads and two mounting studs to prevent the mirrors from turning and potentially ruining the paint.
Classic art deco style with good visibility.
One slim line oval
inside mirror.
Glue on type chrome adjustable mounting. This mirror measures 5″ by 2½”. Mounting surface is 1″ from back of mirror. Mounting surface is 1″ in diameter. Glue is not included.
One slim line oval
inside mirror.
Screw on chrome adjustable mounting. This mirror measures 5″ by 2½”. The long arm measures 2″ long, the ball measures 1″ from the back of the mirror. From the back of the mirror to the mounting plate measures 1½”. The mounting plate is ¾” wide by 2¾” long.
The holes are spaced 2″ apart, center to center.
1930 1931 Ford Outside Post Mirror
1955 1956 1957 Chevrolet mirrors.
Pair Flamed Oval outside mirror.
Screw on adjustable outside rear view mirrors with flames. Beautifully chrome plated. Brand new universal fit. This mirror head measures 5-1/8″ at it’s widest point by 2-5/8″ and is 3/8″ thick. The mounting arm measures about 5-1/4″ long. The mounting surface is 3/8″ by 1/2″. The flames are recessed into the mirror housing. The flames are all hand painted and no two paint jobs are alike.
One Flamed oval inside rear view mirror.
Glue on type chrome adjustable mounting. The mirror head measures 5″ at it’s widest point by 2-1/2″ and is 5/16″ thick. Mounting surface is 1″ from back of mirror. Mounting surface is 1″ in diameter. The flames are recessed into the mirror housing. The flames are all hand painted and no two paint jobs are alike. Glue not included.
One screw on adjustable mounting inside rear view mirror with flames.
Beautifully chrome plated. This mirror head measures 5″ at it’s widest point by 2½” and is 3/8″ thick. The long arm measures 2¼” long, the ball measures 1″ from the back of the mirror. The mounting plate is & 5/16″ wide by 2″ long. The holes are spaced 1½” apart, center to center. The flames are recessed into the mirror housing. The flames are all hand painted and no two paint jobs are alike.
3” Peep Mirror or 4” Peep Mirror
One Pair of outside rearview mirrors. Clamp on mount universal fit. 3″ or 4” stainless head. Chrome die cast curved arm. Fully adjustable.
The mirror has a gray tint for nighttime reflection. Can be used on either side.
Woody surf board mirror
Inside rear view mirror. Attractive plastic wood grain finish.
Has adjustable chrome glue on mount. This mirror head measures 12½” at it’s widest point by 2½” and is 1/2″ thick.
Mounting surface is 1″ from back of mirror.
Mounting surface is 1″ in diameter.
Swan neck style outside mirrors.
One pair left & right.
They are triple chrome plated. Mirror head is 4″ in diameter. These have rubber mounting pads and two mounting studs to prevent the mirrors from turning and potentially ruining the paint.
Classic art deco style with good visibility.
One slim line oval
inside mirror.
Glue on type chrome adjustable mounting. This mirror measures 5″ by 2½”. Mounting surface is 1″ from back of mirror. Mounting surface is 1″ in diameter. Glue is not included.
One slim line oval
inside mirror.
Screw on chrome adjustable mounting. This mirror measures 5″ by 2½”. The long arm measures 2″ long, the ball measures 1″ from the back of the mirror. From the back of the mirror to the mounting plate measures 1½”. The mounting plate is ¾” wide by 2¾” long.
The holes are spaced 2″ apart, center to center.
Woody surf board mirror
Swan neck style outside mirrors.
One slim line oval
inside mirror.
Glue on type chrome adjustable mounting. This mirror measures 5″ by 2½”. Mounting surface is 1″ from back of mirror. Mounting surface is 1″ in diameter. Glue is not included.
One slim line oval
inside mirror.
Screw on chrome adjustable mounting. This mirror measures 5″ by 2½”. The long arm measures 2″ long, the ball measures 1″ from the back of the mirror. From the back of the mirror to the mounting plate measures 1½”. The mounting plate is ¾” wide by 2¾” long.
The holes are spaced 2″ apart, center to center.
One slim line oval
inside mirror.
Screw on chrome adjustable mounting. This mirror measures 5″ by 2½”. The long arm measures 2″ long, the ball measures 1″ from the back of the mirror. From the back of the mirror to the mounting plate measures 1½”. The mounting plate is ¾” wide by 2¾” long.
The holes are spaced 2″ apart, center to center.











