1933 1934 Ford
CE-FS2834M $49.99+S/H
CE-FS2834M $49.99+S/H
1928-1932 Ford Reversed Eye Main Leaf Spring. This spring is a replacement for the stock main leaf. This will lower the front of the vehicle approximately 1″. This will only work with a stock width axle. This measures about 31-3/4″ eye to eye UNLOADED. It is about 1-3/4″ wide. This is an inexpensive way of lowering the front end of your car.
DF-336334 $124.99+S/H
DF-336334 $124.99+S/H
1933-1934 Ford Rear Spreader Bar.
This is highly polished stainless steel tubing. In the exact dimensions as the original. Bar is about 1-3/4″ in diameter. The length end to end is 43-3/4″. The holes on the attaching flange are 2-1/2″.
- J-1817700 $34.99+S/H
1932-1934 Ford rear view outside windshield post mount mirror.
All polished stainless steel with a smooth back and an anti glare mirror head which is about 4″ in diameter. The arm measures about 5-1/2″ tip to tip. The arm itself (without measuring the threads on either end) measures about 4-1/4″. This has a 3/8” fine thread.
J-B46335ss $19.99+S/H
1932-1948 Ford trucks. Set of four (4) door hinge pins
Beautifully polished stainless steel. The pins are 2-3/4″ in length from under the head measured straight down and they are 1/4″ in diameter.
- J-1817700 $34.99+S/H
1932-1934 Ford rear view outside windshield post mount mirror.
All polished stainless steel with a smooth back and an anti glare mirror head which is about 4″ in diameter. The arm measures about 5-1/2″ tip to tip. The arm itself (without measuring the threads on either end) measures about 4-1/4″. This has a 3/8” fine thread.
J-B46335ss $19.99+S/H
1932-1948 Ford trucks. Set of four (4) door hinge pins
Beautifully polished stainless steel. The pins are 2-3/4″ in length from under the head measured straight down and they are 1/4″ in diameter.
J-8140/41ss $19.99+S/H
Ford 1928-1934 reproduction front spring clamps
J-HR13112-B $74.99+S/H
1922-1934 Ford Headlight Mounts.
These are cast iron. They have a nice smooth flat black finish and can be installed as is or you could paint them any color. Designed to fit most fenderless rods. They are left and right with the correct curve. Comes with mounting hardware. The hole is 1/2″ but can be opened up to 5/8″. On the base the widest point is about 1-1/2″ by 3″. The holes are about 2″ center to center. These measure about 5″ straight up from the base. These also look great on fenderless 1928 1929 1930 1931 Model A Fords.
J-hr13112s $149.99
1932-1934 Ford headlight mounts.
Top quality stainless steel. Highly polished to a mirror finish. Designed to fit most fenderless rods. They are left and right with the correct curve. Comes with mounting hardware. The hole is 1/2″ but can be opened up to 5/8″. On the base the widest point is about 1-1/2″ by 3″. The holes are about 2″ center to center. These also look great on fenderless 1928 1929 1930 1931 Model A Fords.
J-hr16780f $39.99+S/H
1928-1936 Ford hood support.
All polished stainless steel. Includes anti-rattle washers & instructions. This is used to hold the hood safely open. This is for a 4 piece type hood. Fits Ford Model A cars & trucks 1928 1929 1930 1931. Fits Ford V 8 & 4 cyl car 1932 1933 1934 1935 1936. Fits Ford pickup truck V 8 & 4 cyl 1932 1933 1934.
J-HR5033VL $199.99+S/H
1933-1934 Ford polished stainless steel front V shaped spreader bar
It is stainless steel with a semi polished brush finish. Designed to fit stock width frames and has the flange plates for easy “bolt on” installation. This measures 25-7/16″ end to end. The holes, on the side, are 4-3/4″ center to center. The hole on the tube end of the bracket is threaded and measures 1/2″ coarse 13 threads per inch. The amber lenses measure 4-3/8″ by 1-1/8″. The bulbs are 1157 12V dual filament. The wires are made long enough to exit the bar from right or left side.
J-HR5033VS $124.99+S/H
1933-1934 Ford polished stainless steel front V shaped spreader bar.
Designed to fit stock width frames and has the flange plates for easy “bolt on” installation. This measures 25-7/16″ end to end. The holes, on the side, are 4-3/4″ center to center. The hole on the tube end of the bracket is threaded and measures 1/2″ coarse 13 threads per inch.
J-HR13112-B $74.99+S/H
J-HR13112-B $74.99+S/H
1922-1934 Ford Headlight Mounts.
These are cast iron. They have a nice smooth flat black finish and can be installed as is or you could paint them any color. Designed to fit most fenderless rods. They are left and right with the correct curve. Comes with mounting hardware. The hole is 1/2″ but can be opened up to 5/8″. On the base the widest point is about 1-1/2″ by 3″. The holes are about 2″ center to center. These measure about 5″ straight up from the base. These also look great on fenderless 1928 1929 1930 1931 Model A Fords.
J-hr13112s $149.99
J-hr13112s $149.99
1932-1934 Ford headlight mounts.
J-hr16780f $39.99+S/H
J-hr16780f $39.99+S/H
1928-1936 Ford hood support.
J-HR5033VL $199.99+S/H
1933-1934 Ford polished stainless steel front V shaped spreader bar
It is stainless steel with a semi polished brush finish. Designed to fit stock width frames and has the flange plates for easy “bolt on” installation. This measures 25-7/16″ end to end. The holes, on the side, are 4-3/4″ center to center. The hole on the tube end of the bracket is threaded and measures 1/2″ coarse 13 threads per inch. The amber lenses measure 4-3/8″ by 1-1/8″. The bulbs are 1157 12V dual filament. The wires are made long enough to exit the bar from right or left side.
J-HR5033VS $124.99+S/H
1933-1934 Ford polished stainless steel front V shaped spreader bar.
Designed to fit stock width frames and has the flange plates for easy “bolt on” installation. This measures 25-7/16″ end to end. The holes, on the side, are 4-3/4″ center to center. The hole on the tube end of the bracket is threaded and measures 1/2″ coarse 13 threads per inch.