1932 Ford

J-HR1678OF $39.99+S/H

1928-1936 Ford hood support

All polished stainless steel, includes anti-rattle washers & instructions.  This is used to hold the hood safely open.

This is for a 4 piece type hood.  Fits Ford Model A cars & trucks 1928 1929 1930 1931

Fits Ford V8 & 4 cyl car 1932 1933 1934 1935 1936

Fits Ford pickup truck V8 & 4 cyl 1932 1933 1934

CE-FS2834M $49.99+S/H

1928-1934 Ford Reversed eye main leaf spring.

This spring is a replacement for the stock main leaf.  This will lower the front of the vehicle approx. 1″.  This will only work with a stock width axle.  This measures about 31-3/4″ eye to eye UNLOADED It is about 1-3/4″ wide.  This is an inexpensive way of lowering the front end of your car.

DF-3362 $59.99+S/H

1932 Ford front spreader bar.

This is highly polished stainless steel tubing.  In the exact dimensions as the original.  Bar is 1-1/2″ in diameter.  The length end to end is 23 1/8″.

J-1817700 $34.99+S/H

1932 Ford rear view outside windshield post mirror.

Original style 1932 Ford outside post mount mirror.  All polished stainless steel with a smooth back and a anti glare mirror head which is about 4″ in diameter.  The arm measures about 5-1/2″ tip to tip.  The arm itself (without measuring the threads on either ends) measures about 4-1/4″. It has a 3/8” fine thread.

J-HR13112-B $74.99+S/H

Hot Rod headlight mounts.

These are cast iron. Brand new pair.  They have a nice smooth flat black finish and can be installed as is or you could paint them any color.  Designed to fit most fenderless rods.  The are left and right with the correct curve.  Comes with mounting hardware.  The hole is ½” but can be opened up to 5/8″.  On the base the widest point is about 1-1/2″ by 3″.  The holes are about 2″ center to center.  These measure about 5″ straight up from the base.  These also look great on fenderless 1928 1929 1930 1931 Model A Fords.

J-HR13112S $149.99

Hot Rod headlight mounts.

Top quality stainless steel.  Brand new pair.  Highly polished to a mirror finish. Designed to fit most fenderless rods.  The are left and right with the correct curve.  Comes with mounting hardware.  The hole is ½” but can be opened up to 5/8″.  On the base the widest point is about 1-1/2″ by 3″. The holes are about 2″ center to center.  These also look great on fenderless 1928 1929 1930 1931 Model A Fords.

J-8140/41SS $19.99+S/H

Ford 1928-1934 front spring clamps.

Pair of reproductions.  Polished stainless steel with SS bolts & nuts. 1-3/4″.

J-B46335SS $19.99+S/H

Stainless Steel Hinge Pins

Fits 1932-1948 Ford cars & trucks and 1948-1952 Ford trucks.  Set of four (4) door hinge pins.  Beautifully polished stainless steel.  The pins are 2-3/4″ in length from under the head measured straight down and they are 1/4″ in diameter.   Be sure to check your measurements.

J-HR5032SL $169.99+S/H

1932 Ford front spreader bar with driving/directional lights with amber lenses.

J-HR5032VL $199.99+S/H

1932 Ford Front V shaped spreader bar with driving/directional lights and amber lenses.

J-8140/41SS $19.99+S/H

Radiator support rod brackets.

Polished stainless steel. Includes button head fasteners.  Pair of reproduction brackets.  These hold the rods to the firewall. Fits all Fords 1928-1932 1928 1929 1930 1931 1932  Will also will fit 1932, 1933 and 1934 Ford pickup trucks.  The rods are not included. 

---

J-HR5032VS $74.99+S/H

1932 Ford front V shaped spreader bar

Polished stainless steel  V shaped spreader bar.  Designed to fit stock width frames and has the flange plates for easy “bolt on” installation. This measures 22-7/8″ end to end. The holes, on the side, are 2-3/8″ center to center.  The hole on the tube end of the bracket is threaded and measures 1/2″ coarse 13 threads per inch.

 

---

J-HR5041P $64.99+S/H

1932 Ford Front License Plate Bracket

Highly polished aluminum.  The license plate hole distance is standard license plate size 5-3/4″ center to center. The holes that mount the license tag are threaded 1/4″-20 thread.  Comes with instructions and mounting hardware for brackets to spreader bar. Doesn’t come with plate to bracket hardware.  These are made to fit a 1-1/2″ Deuce front spreader bar.

 

---

J-HR5077P $64.99+S/H

1932 Ford. One pair of rear license plate mounting brackets.

Highly polished aluminum.  The license plate hole distance is standard license plate size 5-3/4″ center to center.  The holes that mount the license tag are threaded 1/4″-20 thread.  Comes with instructions and mounting hardware for brackets to spreader bar. Doesn’t come with plate to bracket hardware.  These are made to fit a 2″ Deuce rear spreader bar.

---

J-SR5308S $124.99+S/H

Upper shock mounts.

These are cast using 304 high chromium stainless steel that is highly polished.  The hardware is nicely chrome plated.  These will work great on early Ford type hot rods.  These are very similar in style and shape to original 1953-1956 Ford F100 pickup truck type mounts only these are drop dead gorgeous.  In some circles this type of highly polished stainless steel is known as investment cast.  The shock shaft is 5/8″ in diameter.  The holes measure about 2-3/8″ center to center.  The distance from the top bolt hole to the 90 degree bend where the shock mounts is about 4-1/4″.  These also come with weld on type bungs, but we have installed these on cars with nuts and washers and they have been driven many miles without failure.

---

Call For Pricing

1932 Ford ChassisOur frames are welded up on a jig to insure proper alignment and specs. These can be ordered in any stage of completion.

---